Your Cart is Empty
$59.99
SKU#:T3-3157A
You Save 14% ($10.00)Important Notice:
• Our LED replaces halogen bulbs only. It does not replace HID or LED from factory.
• Please leave your vehicle make/model/year to cart before place the order, so we can provide follow-up support to you better in the future.
Lasfit T series LED bulbs are specially made for turn signal lights, high brightness, and a built-in canbus decoder, no extra harness or load resistors needed, plug and play, it's very convenient to replace the stock halogen turn signal light bulbs. Lots of people have got Lasfit T series LED bulbs and most of them are satisfied with their performance. T series LED bulbs are not perfectly compatible with some vehicles or can't work stably on some specific models and caused error code or hyper flash. Lasfit always deeply cares about user experience and has upgraded the T series based on customers' feedback.
NOTE:
1. This product is not compatible with the below vehicles, if you have one of these vehicles, please don't buy this product.
• 1997-2013 Chevrolet Corvette
• 2004-2005 Chevrolet Silverado
• 2005-2015 Toyota Tacoma
• 2007-2017 Toyota Tundra
• 2002-2006 Toyota Camry
• 2012-2014 Dodge Charger
• 2014-2018 Ram
• 2015-2017 Dodge Durango
2. NOT compatible if the bulb is all in one for the rear turn signal and brake lights.
3. Besides, 3157 bulbs have CK and Non-CK circuit, some vehicles may require CK specific sockets. If you are not sure, please click here to find which bulb you need. If the bulbs can't work properly, please feel free to contact us to exchange the right bulbs.
The most annoying thing for users is that compatibility problems such as dashboard errors, hyper flash, or working stably for a couple of minutes then starting hyper flash, frequently occur after replacing LED turn signals with LED bulbs. The built-in canbus decoder of T3 series LED bulbs increases the wattage to match the OEM computer inspection system and prolongs the decoding time, no error code, and you don't worry about hyper flash after working for a few minutes.
Some customers complained T series LED turn signal bulbs are a little bit too bright and glare at other traffic, so the T3 series is reduced luminance. Equipped with 20 high-light flip chips, the bulbs provide 2000LM and 24W of lighting, ensuring sufficient brightness for your vehicle. Additionally, the soft beam pattern helps prevent flashing to the side of passers-by.
Excellent Intelligent Temperature Control system will protect bulbs against excessive current and overheating and ensure a longer lifespan.
While other LED bulbs on the market have sacrificed heat dissipation due to their small size, Lasfit has listened to user feedback regarding bulb lifespan and focused on developing T-series. These LED bulbs utilize smart IC chips and fuses, as well as aviation-grade aluminum for superior heat dissipation. Additionally, a built-in thermal insulation layer further enhances heat dissipation performance to provide a longer lifespan for the bulb.
Product: T3-3157A
Package Includes: 2 Bulbs
Fit Size: 3157 / 3157A / 3057 / 3057A / 3457 / 3457A / 4057 / 4157 / 4157NA
Installation Position: Turn Signal Light
Wattage: 24W/bulb(max)
Lumens: 2000LM/bulb(max)
Color: Bright Amber
LED Chips: 20pcs 3030 high-intensity LED Chips
Socket: standard socket
● 45 Days Money-Back Guarantee
Our return policy allows you to return your purchase within 45 days of the date of purchase for a full refund, no questions asked. We make the return process hassle-free by providing a return shipping label for your convenience.
● 1-Year Hassle-Free Warranty
Lasfit provides a hassle-free return policy and warranty for 1 year. In the event of any quality issues, we offer an easy exchange or return with a provided return label.
● (909) 758-7900 - Telephone Service, talk to a specialist
● Email Customer Service, 24-hour response
The T3-3157 amber bulb is working great. I also installed the T3-3157 red for the tail and brake lights too. I also installed the T3 switch back LED front turn signals and the T3 red LED for the rear turn signal of my 2020 Toyota 4Runner. I had a hyper flash issue with your older version red LED after about 2 minutes waiting to make a turn. I guess the new T3 version took care of the heat issue. They look and work great on both vehicles without any hyper flashing. Overall, I’m very satisfied with your product and customer service. Thanks!
Love how no conversion kit is needed to replace the incandescents. The bulbs are bright look great and don't produce errors or hyper flash. Fit good but they did have an issue locking into the bulb plug. The groove on the bulb wasnt deep enough for the locking tabs. A tiny drop of gorilla glue did the trick.
I wanted to have my turn signals updated to led to complete the look of my front end lights. This will also be used as my DRLs. Most important and lastly. These work great and do not hyper flash.
Long story short I had to replace my front turn signal lights which on a Gen 2 Toyota Tundra is also the DRL- Daylight Running Lights. I purchased some inexpensive LED’s and the hyper flash started. I then purchased very high end headlight assemblies thing this would solve the hyper flash. I should have read the small print that these top of line lights utilize the stock bulbs for turn and DRL! I then scoured the internet for fixes but did not want to install high heat resistors anywhere online and especially in my plastic turn signal flash module under the dash. I came across these new LASFIT bulbs and decided I had nothing to lose. For around $60 bucks they solved my problem! So I purchased two more for the rear of my truck to match the excellent brightness!
I got these bulbs for my 4Runner they are great!
Got them quick and they were easy to install.
They are bright and look much better than the old bulbs.
The T3-3157 amber bulb is working great. I also installed the T3-3157 red for the tail and brake lights too. I also installed the T3 switch back LED front turn signals and the T3 red LED for the rear turn signal of my 2020 Toyota 4Runner. I had a hyper flash issue with your older version red LED after about 2 minutes waiting to make a turn. I guess the new T3 version took care of the heat issue. They look and work great on both vehicles without any hyper flashing. Overall, I’m very satisfied with your product and customer service. Thanks!
Love how no conversion kit is needed to replace the incandescents. The bulbs are bright look great and don't produce errors or hyper flash. Fit good but they did have an issue locking into the bulb plug. The groove on the bulb wasnt deep enough for the locking tabs. A tiny drop of gorilla glue did the trick.
I wanted to have my turn signals updated to led to complete the look of my front end lights. This will also be used as my DRLs. Most important and lastly. These work great and do not hyper flash.
Long story short I had to replace my front turn signal lights which on a Gen 2 Toyota Tundra is also the DRL- Daylight Running Lights. I purchased some inexpensive LED’s and the hyper flash started. I then purchased very high end headlight assemblies thing this would solve the hyper flash. I should have read the small print that these top of line lights utilize the stock bulbs for turn and DRL! I then scoured the internet for fixes but did not want to install high heat resistors anywhere online and especially in my plastic turn signal flash module under the dash. I came across these new LASFIT bulbs and decided I had nothing to lose. For around $60 bucks they solved my problem! So I purchased two more for the rear of my truck to match the excellent brightness!
I got these bulbs for my 4Runner they are great!
Got them quick and they were easy to install.
They are bright and look much better than the old bulbs.
The T3-3157 amber bulb is working great. I also installed the T3-3157 red for the tail and brake lights too. I also installed the T3 switch back LED front turn signals and the T3 red LED for the rear turn signal of my 2020 Toyota 4Runner. I had a hyper flash issue with your older version red LED after about 2 minutes waiting to make a turn. I guess the new T3 version took care of the heat issue. They look and work great on both vehicles without any hyper flashing. Overall, I’m very satisfied with your product and customer service. Thanks!
Love how no conversion kit is needed to replace the incandescents. The bulbs are bright look great and don't produce errors or hyper flash. Fit good but they did have an issue locking into the bulb plug. The groove on the bulb wasnt deep enough for the locking tabs. A tiny drop of gorilla glue did the trick.
I wanted to have my turn signals updated to led to complete the look of my front end lights. This will also be used as my DRLs. Most important and lastly. These work great and do not hyper flash.
Long story short I had to replace my front turn signal lights which on a Gen 2 Toyota Tundra is also the DRL- Daylight Running Lights. I purchased some inexpensive LED’s and the hyper flash started. I then purchased very high end headlight assemblies thing this would solve the hyper flash. I should have read the small print that these top of line lights utilize the stock bulbs for turn and DRL! I then scoured the internet for fixes but did not want to install high heat resistors anywhere online and especially in my plastic turn signal flash module under the dash. I came across these new LASFIT bulbs and decided I had nothing to lose. For around $60 bucks they solved my problem! So I purchased two more for the rear of my truck to match the excellent brightness!
I got these bulbs for my 4Runner they are great!
Got them quick and they were easy to install.
They are bright and look much better than the old bulbs.
